Installing Insulation on an Electric Hot Water Heater

Installing an Insulation Blanket on an Electric Water Heater

Note: Installation is more difficult on gas and oil-fired heaters. Ask a qualified HVAC contractor for instructions.

  1. Cut the tank top insulation to fit around the piping in the top of the tank. Tape the cut section closed after the top has been installed.
  2. Fold the corners of the tank top insulation down and tape to the sides of the tank.
  3. Position the insulating blanket around the circumference of the tank. For ease of installation, position the blanket so that the ends do not come together over the access panels in the side of the tank. Some tanks have only one access panel.
  4. Secure the blanket in place with the belts provided. Position the belts so they do not go over the access panels (Figure 2). Belts should fit snugly over the blanket but not compress it more than 15% to 20% of its thickness. The installation is easier with two people. If working alone, use tape to hold the blanket to the top until you get the belts into position.
  5. If your water heater has the temperature/ pressure relief valve and the overflow pipe on the side of the tank instead of on the top, install the blanket so these items are outside of the blanket. Depending on the piping arrangement and location, you may need to compress, or even cut, the blanket.
  6. Locate the four corners of the access panel(s). Make an x-shaped cut in the insulating blanket from corner to corner of each access panel.
  7. Fold the triangular flaps produced by the cuts underneath the insulating blanket. Repeat steps 6 and 7 for the rating/ instruction plate.
  8. The blanket must not be installed on a leaking tank.

© Online-Access

Dykstra Home Solutions LLC belongs to the Carrier Dealer Hall of Fame!
For your AC repair in Crestwood IL, trust a NATE certified contractor.
Dykstra Home Solutions LLC is certified by the National Women's Business Council.
Dykstra Home Solutions LLC is the winner of Carrier's Presidents Award
Dykstra Home Solutions LLC is a Carrier Distinguished Dealer.
Dykstra Home Solutions LLC is a proud member of the National Association of Women Business Owners
 
24 Hour Emergency Service Call Us Today (800)421-3220 Fill Out Our Online Form
 
Contact Information
 
Address:   13450 S. Cicero Ave. STE 6
Crestwood, IL 60418
Phone: 800-421-3220
Showroom / Parts Counter Hours:
Monday - Friday | 8:00am - 5:00pm
Saturday | 8:00am - 12:00pm
24 hour emergency service
 
Connect With Us
 
Like us on facebook for more info on our AC repair service in Crestwood IL
For AC repair service in Crestwood IL, find us on Google!
Follow us on Twitter for updates on our Ductless AC repair service in Naperville IL
Read what your neighbors say about the AC repair or installation we performed near Crestwood IL on Yelp!
For Electrical repleacement in Crestwood IL, network with Dykstra Home Solutions LLC on LinkedIn.
To schedule your Ductless AC installation in Naperville IL, just email us!
Payment Options
 
For AC in Crestwood IL, we accept most major credit cards.
We accept cash for Cooling repair service provided in Naperville IL.
We accept check for Ductless AC repair service provided in Schererville IN.
We accept check for Ductless AC repair service provided in Schererville IN.
We accept all major credit cards, cash, and checks. We also offer financing options with approved credit.
 
Send Us an Email
 
Home   |   Email Us   |   Schedule Service   |   Get a Quote   |   Ask a Tech   |   Maintenance   |   Employment   |   Financing   |   Search Site